58 CT47 Mobile Computer Series User Guide
4. Using the screen as a viewfinder, move the computer until you see the image
you want to capture.
5. The camera automatically adjusts the focus but you can tap the screen to
modify the focal point. By default, the camera senses the lighting in the
environment and turns the flash On, if needed.
6. Tap or the Volume button to take a photo.
• To view the picture, tap the preview near the bottom of the screen.
• To return to the Camera app, tap the Back navigation button.
Record a Video
This section explains how to record video with the camera in the computer.
1. Tap the Camera icon in the favorites tray.
2. Tap Video (to use the default frame rate) or HFR (to use a higher frame rate).
3. Tap to start recording video.
• To zoom in or out, pinch or spread your fingers apart.
• To toggle sound recording On or Off, tap the microphone icon at the top of
the screen.
• To pause recording, select . To resume recording, tap .
• To capture a still picture during recording, tap the Camera icon .
• To add light while recording, tap the flash icon. Flash is only available with
the rear camera on the back of the computer.
4. When you are done recording, tap .
To Next Page
Loading...
Need help?
General