74 CT47 Mobile Computer Series User Guide
About Network Communications
You can easily add the mobile computer to your wireless or wired network. Connect
the CT47 to your computer using:
• 802.11 a/b/g/n/ac/ax radio communication technology
• Ethernet communication technology
• Bluetooth communication technology
• USB communication technology
Connect to a Wi-Fi Network
The computer contains an 802.11 a/b/g/n/ac/ax radio to transfer data using
wireless communications. Before you connect to a Wi-Fi network, you need to know
about your network security protocol and its required credentials.
By default, the 802.11 radio is disabled.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Network & internet > Internet.
3. Tap Wi-Fi to the toggle the radio On or Off.
4. On the list, tap a network name to initiate a connection.
To add a network if it does not appear on the list:
a. Navigate to the end of the discovered network list, and then tap
Add network.
b. Type the Wi-Fi network name (SSID).
c. Choose a security protocol and add any required information.
d. Tap Save.
5. Enter any required information if the network is secured (e.g., password, key, or
certificate name).
6. Tap Connect.
Second BLE MAC
address
Bluetooth Low Energy address associated with the device.
Up time Time the device has been running since powering on or restarting.
Software
component
version
Select to view the software component version list.
Build number Kernel number installed.
* If your WWAN model uses a dual SIM card setup, both SIM Slot 1 and SIM Slot 2 will be listed.
Setting Description
To Next Page
Loading...
Need help?
General