6. The list of instruments will appear in the main screen along with their serial number.
7. Click on the serial number of the device to open its characteristics.
In SSDC, the devices are shown, including their Serial Number, with the “Connected” icon:
8. Click on “Settings” and scroll down to “Policy Settings”
9. “Policy Enable Bump” and “Policy Enable Calibration” can be enabled or disabled from
this screen. “Policy Bypass Bump” and “Policy Bypass Calibration” can also be activated
Honeywell MultiRAE Series™ 115 User Manual
To Next Page
Loading...
Need help?
General
