Honeywell MultiRAE Series User Manual

sensor.
When used in
TVOC mode, a
MultiRAE in
benzene mode
shows all sensor
readings
continuously.
In benzene mode,
the display
prompts for
snapshot
sampling.
Toggle Display is for LEL and VOC sensor
to alternate between LEL and VOC reading
and their CFs. Safety Suite Device
Configurator (SSDC) allows other
MultiRAE instruments to toggle the
display for PID and LEL readings and CFs.
Menus
The reading menus are easy to step through by pressing the [N/-] key.
Hygiene Mode: Sampling is continuous, and Hygiene Mode allows you to clear peak and
minimum values at any time.
Search Mode: Samples only when you tell it to sample. This allows you to save sample readings
as individual events in the datalog. You can also clear peak and minimum values.
Notes:
l
You can switch between Hygiene and Search modes via the Programming Menu or via
Safety Suite Device Configurator (SSDC) (Select Monitor and then Operation Mode).
l
If the instrument is not equipped with a VOC sensor (PID), or is not equipped with an
LEL sensor, then screens for those sensors (VOC Gas Status and LEL Gas Status,
respectively) are not shown.
l
Operation of Wi-Fi-equipped MultiRAE Lite is shown on page 14.
l
Search Mode is not available when MultiRAE is in benzene-specific mode.
l
Benzene-specific operation is shown on section Benzene Mode.
Honeywell MultiRAE Series™ 27 User Manual

Honeywell MultiRAE Series Specifications

General

Brand	Honeywell
Model	MultiRAE Series
Category	Gas Detectors
Language	English