144 Xenon/Granit User Guide
Silent Mode with Long LED
Scan the following bar code to completely silence the Xenon 1900h scanner or
Xenon 1902h scanner and base. The scanner beep, base beep, base and scanner
power up beep, and scanner linking sounds are all silenced. When a bar code is
scanned, the LED and aimer remain solidly lit for 1 second. Green indicates a good
scan, red indicates a bad scan.
Very Low Beeper (Nighttime Mode)
The following bar code silences the base, and sets the scanner for a very low beep
when reading bar codes. After scanning this code, the base beep, base and scanner
power up beep, and scanner linking sounds are all silenced. When a bar code is
scanned, the scanner emits a very soft beep.
Silent Mode with Long LED -
Cordless Scanner and Base
Silent Mode with Long LED -
Corded Scanner
Nighttime Mode -
Cordless Scanner and Base
Nighttime Mode -
Corded Scanner
To Next Page
Loading...
Need help?
General