Xenon/Granit User Guide 181
Codabar Message Length
Scan the bar codes below to change the message length. Refer to Message Length
Description (page 178) for additional information. Minimum and Maximum
lengths = 2-60. Minimum Default = 4, Maximum Default = 60.
Code 39
< Default All Code 39 Settings >
Code 39 On/Off
If you are reading Code 39 bar codes, Codablock A should remain disabled. If you
are enabling Codablock A (see Codablock A on page 213), you should disable Code
39.
Code 39 Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters. Default = Don’t Trans-
mit.
To Next Page
Loading...
Need help?
General