HP P2000 G3 Reference Guide

HP StorageWorks P2000 G3 MSA System SMU Reference Guide 41
Step 8: Confirming configuration changes
Confirm that the values listed in the wizard panel are correct.
• If they are not correct, click Previous to return to previous steps and make necessary changes.
• If they are correct, click Finish to apply the setting changes and finish the wizard.
NOTE: If you changed a controller’s FC loop ID setting, you must restart the controller to make the change
take effect.
Installing a license
A license is required to expand Snapshot limits and to use Replication. The license is specific to a controller
enclosure serial number and firmware version.
If a permanent license is not installed and you want to try these features before buying a permanent
license, you can create a temporary license one time. A temporary license will expire 60 days from the
time it is created. After creating a temporary license, each time you sign in to SMU, a message specifies
the time remaining in the trial period. If you do not install a permanent license before the temporary license
expires, you cannot create new items with these features; however, you can continue to use existing items.
After a temporary license is created or a permanent license is installed, the option to create a temporary
license is no longer displayed.
To view information about system licenses
In the Configuration View panel, right-click the system and select Tools > Install License.
The System Licenses table shows the following information about licensed features:
• Feature. The name of the licensed feature.
• Base. Either:
• The number of components that users can create without a license.
• N/A. Not applicable.
• License. Either:
• The number of user-created components that the installed license supports.
• Enabled or Disabled.
• In Use. Either:
• The number of user-created components that exist.
• N/A. Not applicable.
• Max Licensable. Either:
• The number of user-created components that the maximum license supports.
• N/A. Not applicable.
• Expiration. One of the following:
• Never. License doesn’t expire.
• Number of days remaining for a temporary license.
• Expired. Temporary license has expired and cannot be renewed.
• N/A. No license installed.
The panel also shows the licensing serial number (controller enclosure serial number) and licensing version
number (controller firmware version), for which a license file must be generated in order to successfully
install.

HP P2000 G3 Specifications

General

Brand	HP
Model	P2000 G3
Category	Storage
Language	English