HP P2000 G3 Reference Guide

HP StorageWorks P2000 G3 MSA System SMU Reference Guide 99
• Profile.
• Standard: LUN 0 can be assigned to a mapping.
• OpenVMS: LUN 0 cannot be assigned to a mapping.
• HP-UX: LUN 0 can be assigned to a mapping and the host uses Flat Space Addressing.
Viewing information about a host
In the Configuration View panel, right-click a host and select View > Overview. The Host Overview table
shows:
• Host properties
• The quantity of mappings for the host
Select a component to see more information about it.
Host properties
When you select the Host component, the Properties for Host table shows:
• Host ID. WWPN or IQN.
• Name. User-defined nickname for the host.
• Discovered. If the host was discovered and its entry was automatically created, Yes. If the host entry
was manually created, No.
• Mapped. If volumes are mapped to the host, Yes; otherwise, No.
• Host Type. FC or iSCSI.
• Profile.
• Standard: LUN 0 can be assigned to a mapping.
• OpenVMS: LUN 0 cannot be assigned to a mapping.
• HP-UX: LUN 0 can be assigned to a mapping and the host uses Flat Space Addressing.
Mapping properties
When you select the Maps component, the Maps for Host table shows:
• Type. Explicit or Default. Settings for an explicit mapping override the default mapping.
• Name. Volume name.
• Serial Number. Volume serial number.
• Ports. Controller host ports through which the volume is mapped to the host.
• LUN. Volume identifier presented to the host.
• Access. Volume access type: read-write, read-only, no-access (masked), or not-mapped.
Viewing information about an enclosure
In the Configuration View panel, right-click an enclosure and select View > Overview. You can view
information about the enclosure and its components in a front or rear graphical view, or in a front or rear
tabular view.
• Front Graphical. Shows a graphical view of the front of each enclosure and its disks.
• Front Tabular. Shows a tabular view of each enclosure and its disks.
• Rear Graphical. Shows a graphical view of components at the rear of the enclosure.
• Rear Tabular. Shows a tabular view of components at the rear of the enclosure.
In any of these views, select a component to see more information about it. Components vary by enclosure
model. If any components are unhealthy, a table at the bottom of the panel identifies them.

HP P2000 G3 Specifications

General

Brand	HP
Model	P2000 G3
Category	Storage
Language	English