7-31
Using Passwords, Port Security, and Authorized IP Managers To Protect Against Unauthorized Access
Using IP Authorized Managers
Using Passwords, Port
Security, and Authorized IP
Access Levels
For each authorized manager address, you can configure either of these access
levels:
■ Manager: Enables full access to all web browser and console interface
screens for viewing, configuration, and all other operations available in
these interfaces.
■ Operator: Allows view-only access from the web browser and console
interfaces. (This is the same access that is allowed by the switch’s opera-
tor-level password feature.)
Defining Authorized Management Stations
■ Authorizing Single Stations: The table entry authorizes a single man-
agement station to have IP access to the switch. To use this method, just
enter the IP address of an authorized management station in the Autho-
rized Manager IP column, and leave the IP Mask set to
255.255.255.255. This
is the easiest way to use the Authorized Managers feature. (For more on
this topic, see “Configuring One Station Per Authorized Manager IP Entry”
on page 7-36.)
■ Authorizing Multiple Stations: The table entry uses the IP Mask to
authorize access to the switch from a defined group of stations. This is
useful if you want to easily authorize several stations to have access to
the switch without having to type in an entry for every station. All stations
in the group defined by the one Authorized Manager IP table entry and its
associated IP mask will have the same access level—Manager or Operator.
(For more on this topic, see “Configuring Multiple Stations Per Authorized
Manager IP Entry” on page 7-37.)
To configure the switch for authorized manager access, enter the appropriate
Authorized Manager IP value, specify an IP Mask, and select either
Manager
or
Operator for the Access Level. The IP Mask determines how the Authorized
Manager IP value is used to allow or deny access to the switch by a manage-
ment station.
To Next Page
Loading...
Need help?
General