HP ProCurve series 2500 User Manual

A-3
Transferring an Operating System or Startup Configuration File
Downloading an Operating System (OS)
Transferring an Operating
System or Startup
Using TFTP To Download the OS File from a Server
This procedure assumes that:
■ An OS file for the switch has been stored on a TFTP server accessible to
the switch. (The OS file is typically available from HP’s electronic ser-
vices—see the support and warranty booklet shipped with the switch.)
■ The switch is properly connected to your network and has already been
configured with a compatible IP address and subnet mask.
■ The TFTP server is accessible to the switch via IP.
Before you use the procedure, do the following:
■ Obtain the IP address of the TFTP server in which the OS file has been
stored.
■ If VLANs are configured on the switch, determine the name of the VLAN
in which the TFTP server is operating.
■ Determine the name of the OS file stored in the TFTP server for the switch
(for example, A_01_01.swi).
Note If your TFTP server is a Unix workstation, ensure that the case (upper or
lower) that you specify for the filename is the same case as the characters
in the OS filenames on the server.

HP ProCurve series 2500 Specifications

General

Brand	HP
Model	ProCurve series 2500
Category	Switch
Language	English