HP ProCurve series 2500 User Manual

7-34
Using Passwords, Port Security, and Authorized IP Managers To Protect Against Unauthorized Access
Using IP Authorized Managers
Using Passwords, Port
Security, and Authorized IP
Editing or Deleting an Authorized Manager Entry. Go to the IP Manag-
ers List screen (figure 7-13), highlight the desired entry, and press [E] (for
Edit)
or [D] (for
Delete).
CLI: Viewing and Configuring Authorized IP Managers
Authorized IP Managers Commands Used in This Section
Listing the Switch’s Current Authorized IP Manager(s)
Use the show ip authorized-managers command to list IP stations authorized to
access the switch. For example:
Figure 7-15. Example of the Show IP Authorized-Manager Display
The above example shows an Authorized IP Manager List that allows stations
to access the switch as shown below:
show ip authorized-managers below
ip authorized-managers page 7-35: “To Authorize Manager Access”
page 7-35: “To Edit an Existing Manager Access Entry”
page 7-36: “To Delete an Authorized Manager Entry”
<ip-address>
mask <mask-bits>
<operator | manager>
IP Mask Authorized Station IP Address: Access Mode:
255.255.255.252 10.28.227.100 through 103 Manager
255.255.255.254 10.28.227.104 through 105 Manager
255.255.255.255 10.28.227.125 Manager
255.255.255.0 10.28.227.0 through 255 Operator

HP ProCurve series 2500 Specifications

General

Brand	HP
Model	ProCurve series 2500
Category	Switch
Language	English