HP StorageWorks MSL2024 User Manual

2. Mount the Library in a rack or in the tabletop conversion cover.
To mount the Library in a rack:
a. With assistance, slide the Library onto the metal rails that are already in position in the rack.
b. From the front of the device, secure the front bezel to the rack using a #2 Phillips screw
driver placed through the small holes in the mounting bracket to tighten the captive screws
on each side of the device.
Figure 131 Securing a Tape Library to the rack
.
To replace the tabletop conversion cover:
a. Set the new base chassis on a sturdy surface in front of the cover.
b. Slide the chassis into the cover until the front panel of the chassis is aligned with the cover.
c. Tighten the captive screws on the chassis front panel until the cover is secure.
3. Replace the tape drives.
4. Replace the magazines.
5. Replace the cords and cables.
6. For the MSL4048, replace the power supply and library controller.
7. Reconnect the cables and power cord.
8. Power on the Library.
9. Reconfigure the Library.
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
guide 239

HP StorageWorks MSL2024 Specifications

General

Brand	HP
Model	StorageWorks MSL2024
Category	Storage
Language	English