Folder and Share Management
100 NAS 1000s Administration Guide
AFP (AppleTalk) Sharing
AppleTalk shares can be set up only after Service for AppleTalk and Microsoft Windows NT
Services for Macintosh have been installed on the NAS 1000s.
Installing Services for AppleTalk
To install Services for AppleTalk:
1. From the desktop of the NAS 1000s, click Start, navigate to Settings-Network and
Dial-up Connections, click Local Area Connection, and then click Properties.
2. Click Install. The Select Network Component Type dialog box is displayed.
Figure 55 is an example of the Select Network Component Type dialog box.
Figure 55: Local Area Connection Properties page, Install option
3. Select Protocol and click Add.
4. Select AppleTalk Protocol and click OK.
Installing Windows NT Services for Macintosh
To install Windows NT Services for Macintosh:
1. Select Maintenance from the WebUI interface.
2. Select Terminal Services.
3. Open Add/Remove Programs from the Control Panel.
4. Click Add/Remove Windows Components.
5. Double-click Other Network File and Print Services.
6. Select File Services for Macintosh then click OK.
7. Click Next.
8. Click Finish.
To Next Page
Loading...
Need help?
General
