HP StorageWorks S1000 - NAS User Manual

NetWare File System Management
141NAS 1000s Administration Guide
Figure 82: Create a New Share dialog box, General tab
2. In the General tab, enter the share name and path. Check the Novell NetWare client
protocol checkbox.
To create a folder for the share, check the indicated box and the system will create the
folder when it creates the share.
3. Select the NetWare Sharing tab to enter NCP specific information. See "Modifying Share
Properties" for information on this tab.
4. After all share information is entered, click OK.
Deleting an NCP Share
Caution: Before deleting a share, warn all users to exit that share. Then confirm that no one
is using the share.
To delete a share:
1. From the Shares menu, click Delete.
2. Verify that this is the correct share and click OK.

HP StorageWorks S1000 - NAS Specifications

General

Manufacturer	HP
Model	StorageWorks S1000
Supported Drive Types	SATA
RAID Support	Yes
Category	NAS
RAID Levels	0, 1, 5, 10
Network Interfaces	2 x Gigabit Ethernet
Interfaces	2 x USB 2.0
Protocols	CIFS, NFS, FTP, HTTP, iSCSI