Husqvarna 268 User Manual

58 – English
Cleaning and Inspection
!
WARNING!
Ensure that the spring does not
fly out and cause personal injury!
Clean all parts and check the following:
The starter cord.
The dogs in the starter pulley.
That the pawls on the flywheel are OK, and
spring back towards the centre and move freely.
STARTER
Changing the ferrule
Remove the parts of the old ferrule.
Fit the new ferrule in the starter housing.
Use a wrench, spacer (A) and ball (B).
Splay out the ferrule on the inside as
shown in the figure.
B
A
Eng, p 40-82 96-09-13, 10.2158

Husqvarna 268 Specifications

General

Engine displacement	66.7 cc
Weight	6.2 kg (without cutting equipment)
Fuel tank volume	0.75 liters
Oil tank volume	0.4 liters
Chain pitch	3/8 inch
Bar length	40-70 cm (16-28 in)