Husqvarna 268 User Manual

English – 75
LUBRICATION SYSTEM
Dismantling the oil pump's
worm gear
On some saws the worm gear for the oil
pump is pressed on the crankshaft.
Remove the worm gear by using the
service tool for the saw in question. See
"Tools".
First screw the tool onto the entire worm
gear
Turn the screw until the worm gear is
removed.
Eng, p 40-82 96-09-13, 10.3175

Husqvarna 268 Specifications

General

Engine displacement	66.7 cc
Weight	6.2 kg (without cutting equipment)
Fuel tank volume	0.75 liters
Oil tank volume	0.4 liters
Chain pitch	3/8 inch
Bar length	40-70 cm (16-28 in)