6 CONTROLS
22
6.15 Closing the fuel tank filler cap
S03547-10
– Mount fuel tank filler cap and turn it clockwise until the
release button
1
engages.
Info
Route fuel tank breather hose
2
without kinks.
6.16 Cold start button
S03548-10
The cold start button
1
is fitted to the bottom of the throttle
valve body.
The electronic fuel injection system extends the injection time if
the engine is cold and the ambient temperature is low. To help
the engine burn the increased fuel quantity, it must be supplied
with additional oxygen by pushing the cold start button.
After briefly opening up the throttle and then releasing the throttle
grip again, or turning the throttle grip towards the front, the cold
start button returns to its original position.
Info
Check whether the cold start button has returned to its
basic position.
Possible states
• The cold start button is activated – The cold start button is
pushed in all the way.
• The cold start button is deactivated – The cold start button
is in its basic position.
To Next Page
Loading...
Need help?
General
