Hypertherm Waterjet
305 2nd St NW STE 115
New Brighton, MN 55112 USA
www.hypertherm.com
DECLARATION OF INCORPORATION
DATE OF ISSUE: 2021-05-05
PRODUCT: Waterjet Pump
MODEL: DynaMAX 550P DynaMAX 560P DynaMAX 575P
HyPrecision P-50S HyPrecision P-60S HyPrecision P-75S
The referenced product meets essential requirements of the following Directives and the relevant sections
of harmonised standards:
Directive 2006/42/EC (Machinery)
Annex I: 1.1.2-1.1.7, 1.2.2-1.2.4.3, 1.2.5-1.3.4, 1.3.6-1.7.2, 1.7.4-1.7.4.3
Directive 2104/30/EU (EMC)
EN ISO 12100:2010
EN 60204-1:2018
EN1829-1:2010
EN 61000-6-2:2005/AC:2005
EN 61000-6-4:2007/A1:2011
The technical documentation is compiled in accordance with Annex VII, Part B of Directive 2006/42/EC.
In response to a reasoned request, relevant information on the referenced product may be provided
electronically. The referenced product is partly completed machinery and must not be put into service
until the final machinery into which it is to be incorporated has been declared in conformity with the
provisions of Directive 2006/42/EC.
AUTHORISED Koen van den Bemd
REPRESENTATIVE: European Customer Service
Hypertherm Europe B.V.
Vaartveld 9
4704 SE Roosendaal
The Netherlands
SIGNED: _____________________________________
Gordon Rice
Executive Vice President - Waterjet