Preventive maintenance
72 811390 Operator Manual DynaMAX 550P/560P/575P Waterjet Pump
General
Examine and clean the equipment
1. Check the dirty water container.
WARNING
Repair or replace parts identified in the preventive maintenance schedule or if the parts
show deterioration, corrosion, or damage.
Hydraulic, water, and electrical connections can become loose during shipping and
normal operation. We recommend examining all connections at installation and during
regular maintenance.
Identify the source of a leak and correct the problem. Refer to Leaks on page 74.
A leak can cause damage to the water fittings.
When replacing wiring, use only the same size, type, and color as the original wiring.
Coordinate maintenance and repairs with facility and safety staff.
Keep the work area clean and dry. Clean fluid spills immediately. Use catch basins
under areas where water or hydraulic fluid can spill during maintenance or repair
procedures.
Keep spare parts and repair kits available.
Some referenced parts are included in kits. Refer to Parts lists on page 137 for
information.
Keep the work area clean and dry. Clean fluid spills immediately. Use catch basins
under areas where water or hydraulic fluid can spill during maintenance or repair
procedures.
Do this every work shift.
Refer to local regulations regarding waste water.
Environmental rules can apply to disposal.
Water in the container could have oil in it.
To Next Page
Loading...
Need help?
General
