IBM Power System E950 9040-MR9 User Manual

c. While holding the blue latch (A), rotate the clip (B) into the rail until it clicks into place.
Figure 15. Installing the clip onto the rail
d. Ensure that the clip (C) is flush with the rail and that the system chassis pin is seated in the clip, as
shown in the following gure.
e. Release the blue latch (D).
16
Power Systems: Installing the IBM Power System E950 (9040-MR9)

IBM Power System E950 9040-MR9 Specifications

General

Brand	IBM
Model	Power System E950 9040-MR9
Category	Server
Language	English