MAP 1549: Attention Problem Isolation
Step 1549-1
Record the error code and the location code(s) that sent you to this MAP.
Step 1549-2
Turn off the power.
Step 1549-3
Examine the following table and locate the error code that sent you to this MAP to determine your next
step.
Error Code Action
406x 0EB1 Go to “Step 1549-4”.
406x 0EB2 Go to “Step 1549-4”.
406x 0EB3 Go to “Step 1549-4”.
406x 0EB4 Go to “Step 1549-7” on page 154.
406x 0EB5 Go to “Step 1549-7” on page 154.
406x 0EB6 Go to “Step 1549-7” on page 154.
406x 0EB7 Go to “Step 1549-7” on page 154.
406x 0EB8 Go to “Step 1549-7” on page 154.
406x 0EB9 Go to “Step 1549-7” on page 154.
406x 0EBA Go to “Step 1549-7” on page 154.
406x 0EBB Go to “Step 1549-7” on page 154.
406x 0EBC Go to “Step 1549-7” on page 154.
Step 1549-4
Replace the following cards if present, one at a time:
v First location code item recorded, if any, in “Step 1549-1”.
v Second location code item recorded, if any, in “Step 1549-1”.
v Third location code item recorded, if any, in “Step 1549-1”.
v Processor card 1 at U0.1-P1-C1, if not recorded in “Step 1549-1”.
v Processor card 2 at U0.1-P1-C2, if not recorded in “Step 1549-1”.
Attention: Before replacing the system backplane, call support.
v CEC backplane at U0.1-P1, if not recorded in “Step 1549-1”.
Step 1549-5
Turn on the power.
Chapter 3. Maintenance Analysis Procedures (MAPs) 153
To Next Page
Loading...
Need help?
General