Appendix D. Setting Up the System Rack
Before setting up a rack, review the following specifications and clearance information. Then go to “Model
6C4 Rack Installation Inventory” on page 563.
Rack Specifications
This section contains specifications for the system rack.
7014 Model T00 and T42 Rack
The mechanical packaging, cooling, power supply, and environmental specifications for the rack are shown
in the following table:
Dimensions
Height 1804 mm 71.0 in.
Capacity 36 EIA Units
With PDP - DC only 1926 mm 75.8 in.
Width without side panels 623 mm 24.5 in.
With side panels 644 mm 25.4 in.
Depth with rear door 1042 mm 41.0 in.
RS/6000 T00 with both doors 1098 mm 43.3 in.
pSeries T00 with both doors 1147 mm 45.2 in.
Weight
Base Rack 244 kg 535 lbs
Full Rack 816 kg 1795 lbs.
Electrical²
(sum specified values for drawers or enclosures in rack)
AC Rack Power source loading maximum in
kVA (per PDB)⁴
4.8
Voltage range (V ac) 200 to 240
Frequency (hertz) 50 or 60
Temperature Requirements
(see specifications for drawers or enclosures)
This table continues on the following page.
561
To Next Page
Loading...
Need help?
General