Change SCSI Settings
This option allows you to view and change the addresses of the SCSI controllers attached to your system.
SCSI Utilities
1. Hardware Spin Up Delay
2. Change SCSI Id
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen X = eXit System Management Services
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
Select Console
Note: This option is not available in partitioned systems.
The Select Console utility allows the user to select which console to use to display the SMS menus. This
selection is only for the SMS menus and does not affect the display used by the operating system.
Follow the instructions that display on the screen. The firmware automatically returns to the SMS main
menu.
Chapter 8. Using System Management Services 413
To Next Page
Loading...
Need help?
General