Chapter 8. Drive Maintenance Procedures 8-5
9. Select 70 (Dump Device).
10. Specify the file name from which the dump is to be read, then press Enter.
11. Enter Q. to quit the program.
Offloading Dumps to Sun System using TAPEUTIL
Refer to IBM SCSI Tape Drive, Medium Changer, and Library Device Drivers: Installation
and User’s Guide for details of the tapeutil program in the Sun (Solaris) system.
The tape drive supports forcing a diagnostic dump and storing that dump to a
mounted tape cartridge or to a host system file via the SCSI bus.
The dump icon appears when the dump is available, and remains on the screen to
indicate that trace data is stored in the device.
-------------------- General Commands: ---------------------------
1. Open a Device 7. Request Sense
2. Close a Device 8. Log Sense Page
3. Inquiry 9. Mode Sense Page
4. Test Unit Ready 10. Switch Tape/Changer Device
5. Reserve Device 11. Create Special Files
6. Release Device 12. Query Driver Version
Q. Quit IBMtapeutil
--------------------- Tape Commands: ------------------------------
20. Rewind 33. Set Block Size
21. Forward Space Filemarks 34. Retension Tape
22. Backward Space Filemarks 35. Query/Set Tape Position
23. Forward Space Records 36. Query Tape Status
24. Backward Space Records 37. Load Tape
25. FSFM 38. Unload Tape
26. BSFM 39. Lock Tape Drive Door
27. Space to End of Data 40. Unlock Tape Drive Door
28. Read and Write Tests 41. Take Tape Offline
29. Write Filemarks 42. Enable/Disable Compression
30. Read or Write Files 43. Flush Driver’s Buffer
31. Erase 44. Self Test
32. Reset Drive 45. Display Message
--------------------- IBMtape Commands: ---------------------------
46. Query Sense 52. Locate Tape Position
47. Query Inquiry 53. Read Tape Position
48. Query/Set Tape Parameters 54. Query Mtdevice Number
49. Query/Set Tape Position 55. Synchronize Buffers
50. Query/Set MT/ST Mode 56. List Tape Filemarks
51. Report Density Support
--------------------- Service Aid Commands: -----------------------
70. Dump Device 72. Load Ucode
71. Force Dump 73. Reset Drive
-------------------------------------------------------------------
99. Back To Main Menu
Enter Selection:
To Next Page
Loading...
Need help?
General