Chapter 2. Product Description 2-5
Control Keys
The control keys ( in Figure 2-5) are located to the right of the Operator Panel LCD
Display on the front of the library.
• Plus (upper left button) - This button is used to navigate upward through the
menu items.
• Minus (lower left button) - This button is used to navigate downward through the
menu items.
• Cancel (upper right button) - This button is used in interaction mode to cancel a
user action and return to the last menu item.
• Enter (lower right button) - This button is used in interaction mode to display a
submenu or to select a user action.
View Window
The view window ( in Figure 2-2) is located in the center on the front of the library.
The internal library operation can be viewed through the view window to monitor
accessor and drive functions visually.
In addition to messages on the library Operator Panel, individual drives can also
display various messages on an 8-character drive message display visible through the
view window. For example, the cartridge bar code is displayed on the drive message
display when a cartridge is loaded into the drive.
Serial Number Label
The machine type and serial number ( in Figure 2-2) of the library are located on the
lower left corner of the front bezel of the library. The serial number is the number that
links the library to IBM entitlement for service.
Rear Panel Components
Figure 2-6. Rear panel components
4
2
6
Library Control Blade (LCB) Shipping pin storage slot
RS232C serial port
(for IBM engineering use at the
direction of your next level of
support)
Power supply units Drive cover plate
Tape drive Ethernet port
a34z0041
E05
FC
SHORT-WAVE
4Gb / SEC
PORT0 PORT1
Enc
1
2
3
4
5
6
7
1 4 7
2 5
3 6
To Next Page
Loading...
Need help?
General