Chapter 1. Start Service 1-19
Trap Definitions (Types)
The TS3400 Tape Library supports the following types of SNMP traps.
Network Error
(continued)
“Normal Dump” command execution failure. Download Drive Logs
“Force Dump” command execution failure. Download Drive Logs
Library setting information save failure. Physical
Time server setting information save failure. Network
Network setting information save failure. Network
E-mail setting information save failure. Notifications
SNMP setting information save failure. Notifications
Partition setting information save failure. Logical
Port open failure [**.**.**.**:****].
Do you wish to retry?
Applet 3 times retry
Port open failure [**.**.**.**:*****]
Please check the library and the network condition setting.
Applet shutdown.
Displayed after 3
unsuccessful attempts using
the Java Applet.
Table 1-3. Web user error messages (continued)
Title Message Issuing Panel
Table 1-4. Trap list
Trap Name Enhanced Trap Event Type Description
Alarm
LED
Error
LED
ColdStart – – – – –
authentication Failure – – – – –
enterpriseSpecification
(Vendor unique trap)
unitEventTrap error • Library error (Fatal error)
• Drive error (Fatal error)
–ON
warning • Library error (Warning)
• Drive error (Warning)
–ON
• Redundant power supply error
(CHK-D6/D7)
• Cleaning cartridge demand for an exchange
• Endurance frequency attainment
• Cleaning demand reception from drive
• Connecting with unsupported drive
ON –
info • Beginning of inventory
• Change in library operation mode
• Beginning of medium move
• Completion of medium move
• Library/Drive to not ready
• Library/Drive to online
• Magazine unlock operation
• I/O Station unlock operation
––
To Next Page
Need help?
General