Chapter 4. Infrastructure planning 123
4.7 Uninterruptible Power Supply units
There are several rack mounted uninterruptible power supply (UPS) units that can be used
with the x3850 X6 and x3950 X6 servers. The size and type of the UPS you select will depend
on your countries voltage, type, and number of outlets, and your system and peripheral device
power load. You can use the IBM Power Configurator to assist in determining what UPS
system would be adequate for supporting your load.
You can download the IBM Power Configurator from this website:
http://ibm.com/systems/bladecenter/resources/powerconfig.html
For information about UPS runtime for your power load, see the following UPS guide:
http://www.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/PRS4401
The x3850 X6 and x3950 X6 support the attachment to UPS units listed in Table 4-5.
Table 4-5 Uninterruptible power supply units
For additional information, see the list of IBM Redbooks Product Guides in the Power
infrastructure category:
http://www.redbooks.ibm.com/portals/systemx?Open&page=pg&cat=power
Part number Description
Rack-mounted UPS
24195KX IBM UPS 5000
21303RX IBM UPS 7500XHV
21304RX IBM UPS 10000XHV
53952AX IBM 2200VA LCD 2U Rack UPS (100V/120V)
53952KX IBM 2200VA LCD 2U Rack UPS (230V)
53953AX IBM 3000VA LCD 3U Rack UPS (100 V/120 V)
53953JX IBM 3000VA LCD 3U Rack UPS (200 V/208 V)
53956AX IBM 6000VA LCD 4U Rack UPS (200 V/208 V)
53956KX IBM 6000VA LCD 4U Rack UPS (230 V)
53959KX IBM 11000VA LCD 5U Rack UPS (200V/208V/230V)
To Next Page
Loading...
Need help?
General