7-7
7
VOICE RECORDER FUNCTIONS
■ Playing back the recorded audio (Short REC)
D Basic playing
[F-1•Y] [F-2•Z] [F-3•PLAY]
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-2•VOICE]todisplaytheVoiceRecorder
menu.
ePush [F-1•PLAY] to call up the Voice Recorder
screen.
•Previouslyselectedscreen,TXorRXmemory,isdis-
played. If the TX memory channel (T1–T4) appears,
push[F-7•T/R]toselectRXmemorychannel.
rPush[F-1•Y]or[F-2•Z] to select the desired voice
memory to playback.
tPush[F-3•PLAY]tostartplayback.
•“ ” indicators appear and the timer counts down.
yPush[F-3•PLAY]againtostopplaybackifdesired.
•Playbackisterminatedautomaticallywhenallofthere-
corded contents in the channel are played.
uPush[EXIT/SET]twicetoexittheVoiceRecorder
screen.
■ Recording a received audio (Short REC)
Up to 20 channels of receive voice memories are
available in the IC-7800. And the total audio length
of up to 209 seconds can be recorded in receive
channels. However, the maximum recordable length
into a single channel is 30 seconds.
ThisVoiceRecorder records not only the received
audio, but also the information such as set operating
frequency, mode, and the recording time for your fu-
ture reference.
D One-touch recording
➥ Push [REC] momentarily to records the previous 15
seconds audio.
•Therecordabletimeperiodcanbesetinvoicesetmode.
(p. 7-13)
•Theoperatingfrequency,modeandcurrenttimeareau-
tomatically programmed as the memory names.
NOTE: When transmit (or [PTT] is pushed) within
the set period, no audio will be recorded.
IMPORTANT!
When you record the 21st audio segment, or when
the total audio length exceeds 209 seconds, the old-
est recorded audio is automatically erased to make
room for the new audio.
To Next Page
Need help?
General
