12-2
■ Set mode description
Set mode is used for programming infrequently
changed values or conditions of functions. The IC-
7800 has a level set mode, display set mode, timer set
mode, accessory set mode, others set mode and CF/
USB-Memory set mode.
D Set mode operation
[F-1•LEVEL] [F-2•ACC]
[F-3•DISP]
[F-5•OTHERS][F-4•TIME]
[EXIT/SET] Main dial
[F-7•CF/USB]
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-7•SET]toselectsetmodemenuscreen.
•Holdingdown[EXIT/SET]for1secondalsoselectsset
mode menu screen.
ePush [F-1•LEVEL], [F-2•ACC], [F-3•DISP],
[F-4•TIME], [F-5•OTHERS] or [F-7•CF/USB] to
enter a desired set mode.
r For level, accessory, display and others set mode,
push [F-7•WIDE] to toggle wide and normal
screen.
tPush[F-1•Y ]or[F-2•Z] to select a desired item,
then rotate main dial to adjust/select a desired
value or condition.
•Pushing [F-3•Ω ≈] operation may be necessary for
some items.
y Push [EXIT/SET] twice to exit set mode.
12
SET MODE
To Next Page
Need help?
General
