Icom IC-7800 User Manual

4-24
D PSK memory transmission
Pre-set characters can be sent using the PSK memory.
Contents of the memory are set using the edit menu.
[F-7•1–4/5–8][F-1•PT1]–[F-4•PT4]
[F-1•PT5]–[F-4•PT8]
[EXIT/SET]
qDuringPSKmodeoperation,push[F-3•DECODE]
to select PSK decode screen.
wPush[F-4•TXMEM]toselectPSKmemoryscreen.
ePush [F-7•1–4/5–8] toselect memorybankthen
push one of the function keys ([F-1•PT1] to
[F-4•PT4]or[F-1•PT5]to[F-4•PT8]).
 •Whennokeyboardisconnected,theselectedmemory
contents will be transmitted immediately.
 •Whenakeyboardisconnected,thememorycontents
will be transmitted immediately when function key is
pushed, or transmitted after [F12] on the connected
keyboard is pushed, depending on auto transmission/
reception setting (see below).
•Thetransmissiondate,time,receptiondateand/ortime
may be displayed in RX contents screen, depending on
setting.
✔ For your convenience
When an external keypad is connected, one of PT1 to
PT4 PSK memory contents can be transmitted while
the PSK decoder screen is selected in PSK mode.
See pages 2-6, 2-10 and 12-20 for details.
D Automatic transmission/reception setting
[F-6•AUTO TX] [F-7•PT1..PT8][EXIT/SET]
qDuringPSKmodeoperation,push[F-3•DECODE]
to select PSK decode screen.
wPush[F-4•TXMEM]toselectPSKmemoryscreen,
thenpush[F-6•EDIT]toselectPSKmemoryedit
screen.
 •PSKmemorycontentsofChannel1(PT1)isselected.
ePush[F-7•PT1..PT8]severaltimestoselectthede-
sired RTTY memory.
rPush[F-6•AUTOTX]severaltimestoselectthede-
sired condition, as follows.
 •AUTOTX/RX:Automatically transmits the se-
lected memory and returns to re-
ceive after the transmission.
 •AUTOTX :Automatically transmits the se-
lected memory. To return to re-
ceive, push [F12] on the key-
board.
 •AUTORX :Push [F12] on the keyboard to
transmit the selected memory. Au-
tomatically returns to receive after
the transmission.
 •Noindication :Push [F12] on the keyboard to
transmit the selected memory and
push [F12] again to return to re-
ceive.
t Push [EXIT/SET] to return to exit from PSK mem-
ory edit condition.
4
RECEIVE AND TRANSMIT
NOTE: The transceiver always functions as the
“AUTO TX/RX” setting when no keyboard is con-
nected.

Icom IC-7800 Specifications

General

Brand	Icom
Model	IC-7800
Category	Transceiver
Language	English