Icom IC-7800 User Manual

9-4
■ Programmed scan operation
[SQL] for main [F-1•PROG] [EXIT/SET] Main dial
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wSelectVFOmode.
e Select the desired operating mode.
 •Theoperatingmodecanalsobechangedwhilescan-
ning.
rPush[F-5•SCAN]toselectthescanscreen.
t Set the main band’s [SQL] open or closed.
 •Seepage9-2forsquelchcondition.
yPush[F-1•PROG]tostarttheprogrammedscan.
 •“ ” and decimal points blink while scan-
ning.
u When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
iTocancelthescan,push[F-1•PROG].
 •Rotatingthemaindialalsocancelsthescan.
oHolddown[F-6•RECALL]for1secondtorecallthe
frequency that is set before starting the scan, if de-
sired.
If the same frequencies are programmed into
the scan edge memory channel P1 and P2, pro-
grammed scan does not start.
■ ∂F scan operation
[SQL] for main [F-2•∂F]
[F-4•∂F SPAN]
[EXIT/SET]
Main dial
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wSelectVFOmodeoramemorychannel.
e Select the desired operating mode.
 •Theoperatingmodecanalsobechangedwhilescan-
ning.
rPush[F-5•SCAN]toselectthescanscreen.
t Set the main band’s [SQL] open or closed.
 •Seepage9-2forsquelchcondition.
y Set the ∂Fspanbypushing[F-4•∂F SPAN].
 •±5kHz,±10kHz,±20kHz,±50kHz,±100kHz,±500
kHz and ±1000 kHz are selectable.
u Set center frequency of the ∂F span.
iPush[F-2•∂F] to start the ∂F scan.
 •“ ” and decimal points blink while scanning.
o When the scan detects a signal, the scan stops,
pauses or ignores it depending on the resume set-
ting and the squelch condition.
!0Tocancelthescan,push[F-2•∂F].
 •Rotatingthemaindialalsocancelsthescan.
!1Holddown[F-6•RECALL]for1secondtorecallthe
frequency that is set before starting the scan, if de-
sired.
9
SCANS

Icom IC-7800 Specifications

General

Brand	Icom
Model	IC-7800
Category	Transceiver
Language	English