Icom IC-7800 User Manual

7-9
7
VOICE RECORDER FUNCTIONS
■ Recording a message for transmit
TotransmitamessageusingtheVoiceRecorder,re-
cord the desired message in advance as described
below.
The IC-7800 has digital voice memories for transmis-
sion, up to 4 memories and you can record message
in length of up to 99 seconds.
D Recording
[F-1•Y][MIC] [F-2•Z] [F-4•REC]
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-2•VOICE]todisplaytheVoiceRecorder
menu.
ePush[F-2•MICREC]toselectthevoicemic.record
screen.
rPush[F-1•Y]or[F-2•Z] to select the desired mem-
ory channel.
tHolddown[F-4•REC]for1secondtostartrecord-
ing.
Appears Adjust [MIC] control so that this
indicator reads within 100%.
 •“ ” indicator appears.
 •Speakintothemicrophonewithoutholdingdown[PTT].
 •Previouslyrecordedcontentsarecleared.
 •Audiooutputfromtheinternalspeakerisautomatically
muted.
y While speaking into the microphone with your nor-
mal voice level, adjust the [MIC] control so that the
[MIC-RECLEVEL]indicatorreadswithin100%.
uPush[F-4•REC]momentarilytostoprecording.
 •Therecordingisterminatedautomaticallywhenthere-
maining time becomes 0 second.
iPush[EXIT/SET]twicetoexittheVoiceRecorder
screen.
D Confirming a message for transmit
[F-1•Y] [F-2•Z] [F-3•PLAY]
q Perform the steps q to e as “D Recording”
above.
wPush[F-1•Y]or[F-2•Z] to select the desired mem-
ory channel.
ePush[F-3•PLAY] to playbacktherecordedcon-
tents.
 •“ ” indicator appears.
rPush[F-3•PLAY]againtostopplayback.
 •Playbackisterminatedautomaticallywhenallofthere-
corded contents in the channel are played.
tPush[EXIT/SET]twicetoexittheVoiceRecorder
screen.

Icom IC-7800 Specifications

General

Brand	Icom
Model	IC-7800
Category	Transceiver
Language	English