8-3
■ Memory list screen
The memory list screen simultaneously shows 9 mem-
ory channels and their programmed contents. 15
memory channels can be displayed in the wide mem-
ory list screen.
You can select a desired memory channel from mem-
ory list screen.
D Selecting a memory channel using the memory list screen
[Y][Z]
Main dial[F-1•ROLL]
[F-4•MEMORY]
[EXIT/SET][F-7•WIDE]
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
wPush[F-4•MEMORY]toselectmemorylistscreen.
•[F-7•WIDE]switchesthestandardandwidescreens.
eWhilepushing[F-1•ROLL],rotatethemaindialto
select the desired memory channel.
•[Y] and [Z] can also be used.
r Push [EXIT/SET] to exit memory list screen.
• Memory list screen
D Confirming programmed memory channels
Main dial[F-1•ROLL] [F-2•SET] [EXIT/SET]
q Select memory list screen as described above.
wWhilepushing[F-1•ROLL],rotatethemaindialto
scroll the screen.
ePush[F-2•SET]toselectthehighlightedmemory
channel, if desired.
•“≈” appears beside the selected memory channel num-
ber in the memory list screen and the selected mem-
ory channel contents are displayed below the frequency
readout.
r Push [EXIT/SET] to exit memory list screen.
8
MEMORY OPERATION
To Next Page
Loading...
Need help?
General
