8-7
■ Memo pads
The transceiver has a memo pad function to store fre-
quency and operating mode for easy write and recall.
The memo pads are separate from memory chan-
nels.
The default number of memo pads is 5, however,
this can be increased to 10 in set mode if desired. (p.
12-18)
Memo pads are convenient when you want to memo-
rize a frequency and operating mode temporarily, such
as when you find a DX station in a pile-up, or when a
desired station is busy for a long time and you want to
temporarily search for other stations.
Use the transceiver’s memo pads instead of relying on
hastily scribbled notes that are easily misplaced.
D Writing frequencies and operating modes into memo pads
Newest
Erased
Oldest
In this example, 21.276 MHz (LSB) will be erased
when 7.067 MHz (LSB) is written.
You can simply write the accessed readout frequency
and operating mode by pushing [MP-W].
When you write a 6th frequency and operating mode,
the oldest written frequency and operating mode are
automatically erased to make room for the new set-
tings.
Each memo pad must have its own unique com-
bination of frequency and operating mode; memo
pads having identical settings cannot be written.
D Calling up a frequency and operating mode from a memo pad
You can simply call up the desired frequency and op-
erating mode of a memo pad by pushing [MP-R] sev-
eral times.
•BothVFOandmemorymodescanbeused.
•Thefrequencyandoperatingmodearecalledup,starting
from the most recently written.
When you call up a frequency and an operating mode
from memo pads with [MP-R], the previously dis-
played frequency and operating mode are automat-
ically stored in a temporary pad. The frequency and
operating mode in the temporary pad can be recalled
by pushing [MP-R] several times.
•Youmaythinkthereare6memopadsbecause6different
frequencies (5 are in memo pads and 1 is in the temporary
pad) are called up by [MP-R].
If you change the frequency or operating mode
called up from a memo pad with the main dial, etc.,
the frequency and operating mode in the temporary
pad are erased.
8
MEMORY OPERATION
To Next Page
Need help?
General
