4-17
D Editing RTTY memory
The contents of the RTTY memories can be set using
the memory edit menu. The memory can store and re-
transmit 8 RTTY message for often-used RTTY infor-
mation. Total capacity of the memory is 70 characters
per memory channel.
• Programming contents
[F-1•Ω]
[ABC]/[abc][123]/[Symbol]
[F-7•RT1..RT8][EXIT/SET][F-2•≈]
[F-3•DEL] [F-4•SPACE]
[F-5•Ω≈]
qDuringRTTYmodeoperation,push[F-3•DECODE]
to select RTTY decode screen.
wPush [F-4•TX MEM] to select RTTY memory
screen,thenpush[F-6•EDIT]toselectRTTYmem-
ory edit screen.
•RTTYmemorycontentsoftheChannel1(RT1)isse-
lected.
ePush[F-7•RT1..RT8]toseveraltimestoselectthe
desired RTTY memory channel to be edited.
rPush[F-5•Ω ≈] to select the edit item between
memory contents and memory name.
t
Push [ABC], [abc], [123] or [Symbol] to select the
character group, then rotate the main dial to select
the character, or push the keypad for number input.
•
[abc] appears when [ABC] is pushed when “ABC” char-
acter group is selected, and [Symbol] appears when
[123] is pushed when “123” character group is selected.
•Selectablecharacters(withthemaindial);
✔ For your convenience
When a PC keyboard is connected to [KEYBOARD]
connector on the rear panel, the RTTY memory
contents can also be edited from the keyboard.
yPush[F-1•Ω]or[F-2•≈] to move the cursor back-
wards or forwards, respectively.
•Pushing[F-3•DEL]deletesacharacterand[F-4•SPACE]
inserts a space.
u Repeat steps t and y to input the desired charac-
ters.
i Push [EXIT/SET] to set the contents and exit RTTY
memory edit screen.
4
RECEIVE AND TRANSMIT
• RTTY memory edit screen
• Pre-programmed contents
CH Name Contents
RT1 MYCALLx2
↵DE ICOM ICOM K↵
RT2 MYCALLx3
↵DE ICOM ICOM ICOM K↵
RT3 QSLUR599
↵QSL UR 599–599 BK↵
RT4 DE+UR599
↵QSL DE ICOM ICOM UR 599–599
BK↵
RT5 73 GL SK
↵73 GL SK↵
RT6 CQ CQ CQ
↵CQ CQ CQ DE ICOM ICOM ICOM
K↵
RT7 RIG&ANT
↵MYTRANSCEIVERISIC–7800&
ANTENNA IS A 3–ELEMENT
TRIBAND YAGI.↵
RT8 EQUIP.
↵MY RTTY EQUIPMENT IS
INTERNALFSKUNIT&
DEMODULATOR OF THE IC–7800. ↵
Key selection Editable characters
A to Z (capital letters)
a to z (small letters)
(selectable for memory name only)
0 to 9 (numbers)
!#$%&¥?“‘`^+–✱ / . , : ; =
< > ( ) [ ] { } | _
~
@
( For the memory contents set-
ting,!$&?“‘–/.,:;()↵ are
selectable.)
To Next Page
Loading...
Need help?
General
