48
7 DV MODE OPERATION (Optional UT-121 is required for IC-91A)
■ Copying the call sign
DD
Copying the call sign memory contents
This function is convenient when or modifying a part of the
current call sign.
NOTE: Make sure that the “EDIT RECORD” item in DV set
mode is set to “AUTO” or “SELECT” in advance.
(p. 95)
qDuring DV mode operation, enter call sign set mode.
• CALL SIGN screen is displayed.
wRotate [DIAL]
†
to select “UR,” “R1” or “R2” as desired, then
push [ï](5)
†
.
eRotate [DIAL]
†
to select the desired call sign channel to be
copied.
• U01–U60 and R01–R60 are available.
• When “AUTO” is set to “EDIT RECORD” item
rPush [
≈≈
](6) to select the call sign programming mode.
• A blank channel is selected automatically.
• The 1st digit of the selected call sign blinks.
tEdit or modify the selected call sign as described in “D Sta-
tion call sign programming”
(p. 36) or “D Repeater call sign
programming”
(p. 41).
yPush [ï](5) to store the edited/modified call sign into the
selected blank channel.
NOTE: The message “FULL” is displayed when no blank
channel is available in station or repeater call sign mem-
ory.
Select the desired call sign channel number as described
in step u of “• When “SELECT” is set to “EDIT RECORD”
item” at right-hand page in this case.
To Next Page
Loading...
Need help?
General
