7-8
7
MEMORY OPERATION
DD
Memory bank set
Setting bank limit function for memory channel selec-
tion, for memory scan can be set in bank set mode or
programming bank name.
q Select memory list screen as described at previous
page.
w Push and hold [F-6•EDT/BANK] for 1 sec. to display
the memory bank set mode.
e Push [F-1•Y] or [F-2•Z] to select the desired item.
r Rotate the main dial to set the desired setting.
• Push and hold [F-4•DEF] for 1 sec. to select a default
value.
t Push [EXIT/SET] to return to memory list screen.
• Programming bank names
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ’ ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
~
@)
and spaces can be used for bank name programming.
q Push [F-1•Y] or [F-2•Z] to select the desired mem-
ory bank.
w Push [F-5•EDIT] to edit memory bank name.
•Acursor appears and blinks.
e Input the desired character by rotating the main dial
or by editing the keypad for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and symbols.
• Push [F-1•Ω] or [F-2•≈] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• Push [F-4•SPACE] to input a space.
• Using the receiver’s keypad, [0]–[9], can also enter nu-
merals.
r Push [EXIT/SET] to input and set the name.
• The cursor disappears.
t Repeat steps q to r to program another memory
bank’s name, if desired.
y Push [EXIT/SET] to return to memory list screen.
To Next Page
Loading...
Need help?
General
