2
USING A microSD CARD
2-5
■ Removing the microSD card
q Turn OFF the power.
w Lift OFF the [micro SD] slot cover on the side panel.
e Push in the microSD card until a click sounds, and
then carefully pull it out.
• DO NOT touch the terminals.
r Completely close the [micro SD] slot cover.
CAUTION:
After a microSD card is
inserted, completely close
the [micro SD] slot cover
as shown to the right.
Wrong
Correct
Close the cover,
leaving no gap.
To remove the microSD card while the transceiver’s
power is ON, do the following steps.
q Push [MENU] .
w Push D-pad() to select the root item (“SD Card”),
and then push D-pad(Ent).
e Push D-pad() to select “Unmount,” and then push
D-pad(Ent).
• The dialog “Unmount OK?” appears.
r Push D-pad() to select “YES,” then push D-pad(Ent)
to unmount.
t When unmounting is completed, “Unmount is com-
pleted.” is displayed, and then the screen automati-
cally returns to the SD CARD menu.
y Push [MENU] to exit the MENU screen.
u Lift OFF the [micro SD] slot cover on the side panel.
i Push in the microSD card until a click sounds, and
then carefully pull it out.
• DO NOT touch the terminals.
o Completely close the [micro SD] slot cover.
Slot cover Slot cover
Push the microSD card
until a click sounds.
Pull the microSD
card out.
To Next Page
Loading...
Need help?
General
