6
BC RADIO OPERATION
6-6
■ Basic operation (Continued)
D Using the Attenuator function
The attenuator reduces signal levels to prevent audio
distortion.
This is useful when the transceiver receives a very
strong AM or FM BC Radio signal, or it is in very strong
electromagnetic fields, such as from a broadcasting
station near your location.
The attenuator can be set in both the AM and FM
modes.
q Push [MODE] to select the desired AM or FM
mode.
w Push [QUICK] .
e Push D-pad() to select “ATT (FM),” and then push
D-pad(Ent).
• When the AM mode is selected in step q, select “ATT
(AM).”
r Push D-pad() to select the attenuator.
• ATT (FM)
OFF: The attenuator is OFF.
30dB: The attenuation is about 30 dB.
• ATT (AM)
OFF: The attenuator is OFF.
Auto: The attenuation is automatically switched be-
tween OFF and 30 dB (maximum), depend-
ing on the received signal strength level.
30dB: The attenuation is set to 30 dB.
50dB: The attenuation is set to 50 dB.
t Push D-pad(Ent) to save and exit the Quick Menu
screen.
• When the attenuator is ON, “ATT” appears in the BC Ra-
dio pop up window.
Appears
To Next Page
Loading...
Need help?
General
