Icom ID-51A User Manual

9
D-STAR OPERATION <ADVANCED>
9-16
■ Speech function
The speech function announces the called station call
sign, or the individual or station call sign that is selected
from the RX History by holding down and rotating
[DIAL].
It is convenient when you cannot watch the LCD, or you
missed the call’s audio.
This function helps you to know the call sign of the call-
er station without looking at the LCD.
D Announcing the received call sign
The received call sign can be announced.
q Push [MENU] .
w Push D-pad() to select the root item (“SPEECH”),
and then push D-pad(Ent).
D-pad
()
(Ent)
e Push D-pad() to select “RX Call Sign SPEECH,”
and then push D-pad(Ent).
r Push D-pad() to select “ON (Kerchunk)” or “ON
(All).”
• ON (Kerchunk): When a DV call is received, and if the
call time is short, the calling station’s call
sign is announced. (Default)
• ON (All): When a DV call is received, the calling
station’s call sign is announced.
t Push [MENU] to save, and exit the MENU
screen.
• When a DV call is received, the standby beep sounds,
and after approximately 1 second, the call sign is an-
nounced.
• The transceiver has other Speech functions:
[DIAL] speech function
The frequency or repeater call sign is announced 1
second after [DIAL] selection.
(MENU > SPEECH > DIAL SPEECH)
Mode speech function
The selected operating mode is announced when
[MODE]
is pushed.
(MENU > SPEECH > MODE SPEECH)
• When the digital squelch function is used, and if a
received signal is not addressed to your call sign,
or does not include an unmatched digital code, the
calling station’s call sign is not announced.
‘JM1ZLK’
‘JM1ZLK’
‘Are you listening?’
• When “ON (Kerchunk)” is selected
• When “ON (All)” is selected
NOTE:
• Even if a “/” and a note are after a call sign, they are
not announced.
• The announced contents cannot be recorded on the
microSD card.
Previous view

Icom ID-51A Specifications

General

Brand	Icom
Model	ID-51A
Category	Transceiver
Language	English