11
VOICE MEMORY FUNCTION
11-14
■ Viewing the file information
The transceiver can display the recorded file’s frequen-
cy, mode, date, and so on.
q Push [MENU] to enter the Menu screen.
w Push D-pad() to select the root item (Voice Memo),
and then push D-pad(Ent) to go to the next level.
( MENU > Voice Memo > QSO Recorder > Play Files)
e Refer to the menu sequence shown directly above
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
• The folder list is displayed. (The folders are automatically
created when you start recording.)
• The folder name is composed yyyymmdd (y: year, m:
month, d: day.)
r Push D-pad() to select the folder that contains the
file you want to view, and then push D-pad(Ent).
• The file list is displayed.
• The file name is composed yyyy/mm/dd hh:mm:ss (y:
year, m: month, d: day, hh: hour, mm: minute, ss: sec-
ond.)
t Push D-pad() to select the file that you want to view
the information on, then push [QUICK] to open
the Quick Menu screen.
y Push D-pad() to select “File Information,” then
push D-pad(Ent).
• The information screen appears.
u Push D-pad(Ent) to exit the information screen.
i Push [MENU] to exit the Menu screen.
• Receive Information screen
( Receiving on
the DR screen)
Example of file information screens (The display items differ, depending on the recording contents.)
• Transmit Information screen
(Your own position)
( Transmitting on
the DR screen)
(Your own position) (Destination position)
To Next Page
Loading...
Need help?
General
