16
MENU SCREEN
16-62
■ DV Set items (Continued)
GPS Data Speed (Default: Slow)
DV Set > DV Fast Data > GPS Data Speed
Set the GPS data speed when the DV data is sent by using the DV Fast
Data.
• Slow: Sends GPS data in the slow speed (approximately 950 bps).
• Fast: Sends GPS data in the fast speed (approximately 3480 bps).
NOTE: When using the DV Fast Data, and if you want to send the GPS data
to other transceivers that can receive only slow speed data, set to “Slow.”
TX Delay (PTT) (Default: 2 sec)
DV Set > DV Fast Data > TX Delay (PTT)
Set the TX delay time.
In the low-speed data communication mode and after releasing [PTT], the
transceiver automatically sends the DV data by using the DV Fast Data for
this set period.
• OFF: After releasing [PTT], the transceiver returns to receive.
• 1~10sec: After releasing [PTT], the transceiver sends data by using the
DV Fast Data for this set period.
When the TX data is completely sent within this set period, the
transceiver automatically returns to receive.
NOTE: This function is usable only when the “DV Data TX” is set to “PTT.”
Digital Monitor (Default: Auto)
DV Set > Digital Monitor
Select the receive mode when [SQL] is held down in the DV operation mode.
• Auto: Receives in the DV mode or the FM mode, depending on the re-
ceived signal.
• Digital: Monitors in the DV mode.
• Analog: Monitors in the FM mode.
To Next Page
Loading...
Need help?
General
