3 Peripheral Devices and Options
-
122
-
No. Interface Pins 2 and 3 Pins 1 and 4
Connection between MCTC-PG
and encoder
17 JP17
Door open
button input
Door open display
output
When the CCB is used as a
cascaded CCB, this type of
terminals is invalid. When the
cascaded CCB is used for back
door control, JP17 can be used
to implement back door open.
18 JP18
Door close
button input
Door close display
output
19 JP19
Door open delay
button input
Door open delay
display output
20 JP20
Direct travel ride
input
Non-door zone
stop output
21 JP21 Attendant input Reserved
22 JP22
Direction
change input
Reserved
23 JP23
Independent
running input
Reserved
24 JP24
Fire emergency
input
Reserved
Note: Pins 1 and 2 are positive of power supply. The pin with white dot mark or that is
rectangular is pin 1.
â—†
Perform wiring strictly according to the terminal marks and ensure that the
button is inserted securely.
â—†
The MCTC-CCB has the same interfaces on both ends, and do not make
wrong connection when connecting multiple boards in series.
To Next Page
Loading...
Need help?
General
