Intermec CS40 User Manual

Appendix A — Specifications and Default Settings
CS40 Mobile Computer User’s Manual 111
EA11 Typical Reading Distances
Default Configuration
The following tables list the default values of the configuration
settings supported on the mobile computer. If you restore the mobile
computer to factory default settings, the mobile computer uses these
values.
The settings are grouped by function and reflect the organization of
Intermec Settings. For detailed information on most of the
commands, see the Intermec Settings Command Reference Manual.
Data Collection Settings
Use data collection settings to configure the imager and to configure
the bar codes that you want the imager to be able to read.
Data Collection Settings
Symbology Density Minimum Distance Maximum Distance
Code 39 0.125 mm (5 mil)
0.20 mm (8 mil)
0.25 mm (10 mil)
0.50 mm (20 mil)
1.0 mm (40 mil)
7.2 cm (2.8 in)
3.8 cm (1.5 in)
3.4 cm (1.3 in)
5.0 cm (2.0 in)
8.0 cm (3.1 in)
13.1 cm (5.1 in)
22.5 cm (8.8 in)
27 cm (10.5 in)
44 cm (17.2 in)
83 cm (32.4 in)
UPC/EAN 100% 0.33 mm (13.0 mil) 5 cm (2 in) 32.0 cm (12.5 in)
Data Matrix 0.191 mm (7.5 mil)
0.254 mm (10 mil)
0.381 mm (15 mil)
6.3 cm (2.5 in)
4.8 cm (1.9 in)
*
17.3 cm (6.7 in)
22 cm (8.6 in)
29 cm (11.3 in)
PDF417 0.168 mm (6.6 mil)
0.254 mm (10 mil)
0.381 mm (15 mil)
6.25 cm (2.46 in)
4.5 cm (1.8 in)
4 cm (1.6 in)
15.4 cm (6 in)
23 cm (9 in)
37 cm (14.4 in)
Data Collection Setting Default Value
Enable Scanner Port On
BT-Configure On Connect Overwrite with computer
settings

Intermec CS40 Specifications

General

Brand	Intermec
Model	CS40
Category	Handhelds
Language	English