Chapter 3 — Using the Phone
CS40 Mobile Computer User’s Manual 31
4 Place the SIM card into the slot in the card access door.
5 Close the card access door and install the battery.
6 Press the Power button. The CS40 cold boots.
Turning the Phone On and Off
Before you can start using your phone, you need to enable it. You can
use Wireless Center to enable and disable your phone, as well
Bluetooth and Wi-Fi communications.
To turn on the phone using Wireless Center:
1 Tap Start > Settings > Connections > Wireless Center.
2 Tap Phone.
Making a Phone Call
After you activate your phone, you are ready to start making phone
calls.
To make a phone call:
1 Tap the green phone key.
Or, tap Start > Phone.
2 Tap the keys to enter the telephone number you want to call.
3 Tap the Talk button.
To Next Page
Loading...
Need help?
General
