ITech IT8702 Programming Guide

SOURce Subsystem
Copyright © Itech Electronic Co., Ltd. 97
Query Syntax
[SOURce:]IMPedance:INDuction? [ MINimum | MAXimum | DEFault ]
Returned Parameters
<NR3>
[SOURce:]IMPedance:CAPacitance
This command is used to set the capacitance value when the load is in CZ
mode.
Command Syntax
[SOURce:]IMPedance:CAPacitance <NRf+>
Parameters
20 through 65000uF | MINimum | MAXimum | DEFault
Unit
uF
Returned Parameters
MINimum
Examples
IMP:CAP 5
Query Syntax
[SOURce:]IMPedance:CAPacitance? [ MINimum | MAXimum | DEFault ]
Returned Parameters
<NR3>
[SOURce:]IMPedance:HIGH
[SOURce:]IMPedance:LOW
This command is used to set the high and low voltage determined when the
load is in CZ mode.
Command Syntax
[SOURce:]IMPedance:HIGH <NRf+>

ITech IT8702 Specifications

General

Brand	ITech
Model	IT8702
Category	Test Equipment
Language	English