ITech IT8702 Programming Guide

STATus Subsystem
Copyright © Itech Electronic Co., Ltd. 45
Examples
STAT:QUES:ENAB 32 STAT:QUES:ENAB 1
Query Syntax
STATus:QUEStionable:ENABle?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:QUES?
STATus:PRESet
When this command is sent, the SCPI event registers are affected as follows:
All bits of the following registers are cleared to zero (0):
 Questionable Event Enable Register.
 Channel summary Event Enable Register.
 Operation Event Enable Register
NOTE: Registers not included in the above list are not affected by this
command.
Command Syntax
STATus:PRESet
Parameters
None
Examples
STAT:PRES

ITech IT8702 Specifications

General

Brand	ITech
Model	IT8702
Category	Test Equipment
Language	English