ITech IT8702 Programming Guide

IT873X Specific Commands
Copyright © Itech Electronic Co., Ltd. 49
:LEVel?
:DELay <NRf>
:DELay?
:CONFig
:CONFig?
:IMPedance
[:LEVel]
[:IMMediate] <NRf>
[:IMMediate]?
:RANGe <NRf>
:RANGe?
:RESistance
:RESistance?
: CAPacitance
:CAPacitance?
:INDuction
:INDuction?
:HIGH <NRf>
:HIGH?
:LOW <NRf>
:LOW?
:LIST
:RANGe <NRf>
:RANGe?
:COUNt <n>
:COUNt?
:STEP <n>
:STEP?
:LEVel <NRf>
:LEVel?
:SLEW
[:BOTH] <NRf>
[:BOTH]?
:WIDth <NRf>
:WIDth <NRf>
:SAV <name>
:RCL <name>
:PROTection:CLEar
Query hardware power portection level
Set the delay time after power protection.
Query the delay time after power protection.
Set the hard power protection level.
Query the hard power protection level.
Set const IMPedance level
Query const IMPedance level
Set const resistance range
Query const resistance range
Set const resistance level
Query const resistance level
Set const capacitance level
Query const capacitance level
Set const induction level
Query const induction level
Set the voltage specification of upper limit
Query the voltage specification of upper limit
Set the voltage specification of lower limit
Query the voltage specification of lower limit
Set list range
Query list range
Set list cycle (1 to 65534 or INF)
Query list cycle
Set list step (2 to 254)
Query list step<
Set list step’s level
Query list step’level
Set list step’slew rate
Query list step’slew rate
Set list step’s width
Query list step’s width
Save list file to specify filename (1 to 5)
Recall list file
Clear protection
MAX
3
SENSe Command Summary
These commands are channel specific.

ITech IT8702 Specifications

General

Brand	ITech
Model	IT8702
Category	Test Equipment
Language	English