To Next Page

To Previous Page

SOURce Subsystem

SOUR:RES:RANGE MIN

Query Syntax

[SOURce:]RESistance:RANGe? [ MINimum | MAXimum | DEFault ]

Returned Parameters

<NR3>

[SOURce:]RESistance:HIGH

[SOURce:]RESistance:LOW

This command is used to set the voltage high and low limit determind when the

load is in constant resistance.

Command Syntax

[SOURce:]RESistance:HIGH <NRf+>

[SOURce:]RESistance:LOW <NRf+>

Parameters

MINimum through MAX | MINimum | MAXimum | DEFault

Unit

V (volts)

*RST Value

MAXimum

MINimum

Examples

RES:HIGH 5

Query Syntax

[SOURce:]RESistance:HIGH? [MINimum|MAXimum|DEFault ]

[SOURce:]RESistance:LOW? [MINimum|MAXimum|DEFault ]

Returned Parameters

<NR3>

ITech IT8702 Programming Guide

Other manuals for ITech IT8702