To Next Page

To Previous Page

SOURce Subsystem

[SOURce:]CURRent:TRANsient:BWIDth?

Returned Parameters

<NR3>

[SOURce:]CURRent:HIGH

[SOURce:]CURRent:LOW

This command sets the high and low voltage level when the load is in constant

current mode.

Command Syntax

[SOURce:]CURRent:HIGH <NRf+>

[SOURce:]CURRent:LOW <NRf+>

Parameters

MINimum through MAX | MINimum | MAXimum | DEFault

Unit

V (volts)

*RST Value

MAXimum

MINimum

Examples

CURR:HIGH 5

Query Syntax

[SOURce:]CURRent:HIGH?

[SOURce:]CURRent:LOW?

Returned Parameters

<NR3>

[SOURce:]CURRent:TRIGgered

This command sets the current level that will become active when the next

trigger occurs.

ITech IT8702 Programming Guide

Other manuals for ITech IT8702